Most dresses need 2 to 4 yards of 45-inch fabric, depending on style. Wider 60-inch fabric cuts the total by about a quarter. Use the fabric yardage calculator below for your exact number.
Fabric Yardage Calculator
Calculate exactly how much fabric you need — no guessing, no waste.
What is a fabric yardage calculator?
A fabric yardage calculator works out how many yards of fabric you need to buy for a sewing project. Enter your project and fabric width, and our fabric yardage calculator gives you an estimate with the right allowances already added, so you buy enough without paying for waste.
Yard to cm, inches, feet and meters chart
The international yard equals 36 inches, 3 feet, 91.44 centimeters or 0.9144 meters.
| Yards | Inches | Feet | Centimeters | Meters |
|---|---|---|---|---|
| 1/8 yd | 4.5 in | 0.375 ft | 11.43 cm | 0.114 m |
| 1/4 yd | 9 in | 0.75 ft | 22.86 cm | 0.229 m |
| 3/8 yd | 13.5 in | 1.125 ft | 34.29 cm | 0.343 m |
| 1/2 yd | 18 in | 1.5 ft | 45.72 cm | 0.457 m |
| 5/8 yd | 22.5 in | 1.875 ft | 57.15 cm | 0.572 m |
| 3/4 yd | 27 in | 2.25 ft | 68.58 cm | 0.686 m |
| 7/8 yd | 31.5 in | 2.625 ft | 80.01 cm | 0.800 m |
| 1 yd | 36 in | 3 ft | 91.44 cm | 0.914 m |
| 1 1/4 yd | 45 in | 3.75 ft | 114.3 cm | 1.143 m |
| 1 1/2 yd | 54 in | 4.5 ft | 137.16 cm | 1.372 m |
| 1 3/4 yd | 63 in | 5.25 ft | 160.02 cm | 1.600 m |
| 2 yd | 72 in | 6 ft | 182.88 cm | 1.829 m |
| 2 1/2 yd | 90 in | 7.5 ft | 228.6 cm | 2.286 m |
| 3 yd | 108 in | 9 ft | 274.32 cm | 2.743 m |
| 4 yd | 144 in | 12 ft | 365.76 cm | 3.658 m |
| 5 yd | 180 in | 15 ft | 457.2 cm | 4.572 m |
| 10 yd | 360 in | 30 ft | 914.4 cm | 9.144 m |
How the fabric yardage calculator works
The fabric yardage calculator follows the same logic you would use by hand, in four simple steps.
Start with your length
Use the yardage on your pattern envelope for your size. Most dresses need 2 to 4 yards of 45-inch fabric.
Adjust for width
Patterns usually quote 44 to 45-inch fabric. If yours is wider or narrower, use the formula below.
Add allowances
Add extra for cutting, shrinkage, prints and your size (see the table further down).
Round up
Always round up to the next 1/8 yard, so you never end up short.
Example: 2.5 yards of 45-inch fabric becomes 2.5 × (45 ÷ 60) = 1.875 yards in 60-inch fabric, a saving of about a quarter. On 36-inch fabric it becomes 2.5 × (45 ÷ 36) = 3.125 yards, which is 25% more.
How much extra fabric to add
After you use the fabric yardage calculator, check this table and add any extra your fabric or project needs.
| Situation | What to add |
|---|---|
| Cutting and small mistakes | About 10% |
| Shrinkage (cotton, linen, viscose) | About 5-10%, and pre-wash first |
| One-way prints, napped fabric (velvet, corduroy) and plaids that must match | About 15-25%, depending on the repeat |
| Narrow fabric (36 in) | About 25% more than a 45-inch pattern |
| Taller height or larger size | About 1/4 to 1/2 yard for every few sizes above the smallest size |
| Lining | Calculated and bought separately |
These are rules of thumb, not guarantees. How your pattern pieces fit on the fabric changes the real amount, so when in doubt, buy a little extra.
Worked example
An A-line dress pattern asks for 3 yards of 45-inch fabric. You find a 60-inch wide cotton you love.
- Width adjustment 3 × (45 ÷ 60) = 2.25 yards
- Add 10% for cutting and shrinkage 2.25 × 1.1 = 2.475 yards
- Round up 2 1/2 yards
With a one-way print, add about 20%: 2.475 × 1.2 = 2.97, so buy 3 yards.
Common fabric estimation mistakes
Even a good fabric yardage calculator cannot help if the numbers going in are wrong. Avoid these four mistakes.
- Ignoring fabric width. A pattern written for 45-inch fabric needs more on narrower fabric and less on wider fabric.
- Forgetting shrinkage. Cotton, linen and viscose can shrink, so pre-wash and add a little extra.
- Skipping print direction. One-way prints and plaids that must match use more fabric.
- Buying the exact minimum. Always round up, so one cutting mistake does not mean a second trip to the shop.
Related fabric guides
Fabric yardage calculator FAQs
What is a fabric yardage calculator?
A fabric yardage calculator estimates how many yards of fabric you need for a project. It uses your pattern yardage, fabric width and extra allowances for cutting and shrinkage, so you buy the right amount.
How many yards of fabric do I need for a dress?
Most dresses need 2 to 4 yards of 45-inch fabric. A shift dress needs about 2 to 2.5 yards, an A-line dress 2.5 to 3.5 yards, and a wrap or maxi dress 3 to 5 yards depending on length.
How do I convert yards to meters?
Multiply the yards by 0.9144. For example, 3 yards is 2.743 meters. The chart above shows common conversions from 1/8 yard to 10 yards.
How many yards are in a meter?
One meter is about 1.094 yards. So 3 meters is roughly 3.28 yards, which most shops round up to 3 1/4 yards.
How much extra fabric should I buy?
Add about 10% for cutting and small mistakes. Add 5 to 10% more if the fabric may shrink, and 15 to 25% for one-way prints or plaids that must match.
Does fabric width change how much I need?
Yes. Multiply the pattern yardage by pattern width divided by your fabric width. A pattern that needs 2.5 yards of 45-inch fabric needs about 1.875 yards of 60-inch fabric, a saving of about a quarter. On 36-inch fabric it needs about 25% more.
Should I pre-wash fabric before measuring?
Yes. Cotton, linen and viscose can shrink by 5 to 10%, so wash and dry the fabric the way you will care for the finished item, then cut. Buy a little extra to allow for it.
How accurate is this calculator?
It gives a reliable estimate, but your pattern envelope is the final word. Always check the yardage chart for your size, view and fabric width before you buy.
